UMS "Agram" : CSSR 1986 Diorama part 4 < Articles < Hobby

CSSR 1986 Diorama part 4

Marko Paunović, 10th April 2025

In this series of articles, we will follow my work on a new diorama, another in the 1986 series. This time, we take you behind the Iron Curtain to Czechoslovakia.

As we announced last time, starting this week we will start making the details. So far we have been using larger or smaller elements, but now we are starting with scratchbuilding the parts. First up is the gate. Because it will define how the rest of the fence will look. I decided to make it a standard “closed” type gate – made of pipes with a plate welded to it.

Since I imagined the gate in two parts and that the whole thing had to be quite vertical/parallel and very geometrically correct, I concluded that making a frame out of round profiles would be a very big challenge. That's why I decided to first make two boards (of the same dimensions) around which I would then glue round profiles, thus ensuring the correct shape of both parts of the gate.

Ideally, I would use plasticard. Unfortunately, I didn't have any on hand, so I used clear plastic from an Ikea picture frame. First, I drew two identical rectangles and cut them out.

I now started cutting round profiles around the rectangle. I used 2 mm diameter transparent plastic rods and 1.5 mm for the thinner shapes.

I glued everything together with superglue using an activator so that the connection was immediate..

Finally, I made two latches out of thinner rods. One for the closed part of the gate that goes into the floor. The other on the open door that closes it for the static half of the gate.

Next time we finish the rest of the fence.

Latest articles

Back to Basics Workshops in Medveščak Library

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "476"
    ["member_id"]=>
    string(2) "64"
    ["title_eng"]=>
    string(47) "Back to Basics Workshops in Medveščak Library"
    ["title_hrv"]=>
    string(68) "Back to Basics radionice bojanja minijatura u Knjižnici Medveščak"
    ["mask_eng"]=>
    string(45) "back_to_basics_workshops_in_medvescak_library"
    ["mask_hrv"]=>
    string(65) "back_to_basics_radionice_bojanja_minijatura_u_knjiznici_medvescak"
    ["content_eng"]=>
    string(5094) "
	

	During October and November, we held our Back to Basics miniature painting workshops for the youngest at the Zagreb City Libraries.

	

	

	The first set of three workshops was held in the Youth Department of the Medveščak Library on October 2, 9 and 11, 2025.

	

	

	During the workshops, our youngest participants painted chibi figures from the UMS Agram line and made a castle from upcycled materials.

	

	

	

	

	

	

	

	

	More photos can be found on our social media.

	
"
    ["content_hrv"]=>
    string(5118) "
	

	Tijekom listopada i studenog u Knjižnicama Grada Zagreba smo održali naše Back to Basics radionice bojanja minijatura za najmlađe. 

	

	

	Prvi set od tri radionice održan je u Odjelu za mlade Knjižnice Medveščak 2., 9. i 11.10.2025. 

	

	

	Tijekom radionica naši najmlađi polaznici su bojali chibi figure iz linije UMS Agram te izrađivali dvorac od upcycle materijala.

	

	

	

	

	

	

	

	

	Više fotografija potražite na našim socijalnim mrežama!

	
"
    ["created"]=>
    string(19) "2025-10-13 09:20:17"
    ["modified"]=>
    string(19) "2025-10-13 09:20:17"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "64"
    ["group_id"]=>
    string(1) "1"
    ["first_name"]=>
    string(9) "Krunoslav"
    ["last_name"]=>
    string(8) "Belinić"
    ["first_name_mask"]=>
    string(9) "krunoslav"
    ["last_name_mask"]=>
    string(7) "belinic"
    ["username"]=>
    string(5) "Kruno"
    ["password"]=>
    string(40) "eb3fda45fbec0258e90d809803b10491c548b22f"
    ["born"]=>
    string(19) "2015-01-18 09:19:00"
    ["created"]=>
    string(19) "2015-01-18 09:20:39"
  }
}

Krunoslav Belinić, 13th October 2025

Gaslands - Tutorial II

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "475"
    ["member_id"]=>
    string(2) "35"
    ["title_eng"]=>
    string(22) "Gaslands - Tutorial II"
    ["title_hrv"]=>
    string(37) "Gaslands - bojanje autića - nastavak"
    ["mask_eng"]=>
    string(22) "gaslands_-_tutorial_ii"
    ["mask_hrv"]=>
    string(36) "gaslands_-_bojanje_autica_-_nastavak"
    ["content_eng"]=>
    string(5350) "
	

	In this article I will briefly describe how I painted another set of three cars for Gaslands. Same as last time, I started with a black undercoat.

	

	As I decided to keep the colour of the vehicles matt black, I left it at that and proceeded to paint the windshields. Using much the same method I used for the yellow crew, I applied the chosen paint scheme. Unlike blue windshields with the yellow crew, here I decided to use the yellow/red combo.

	

	I then added chrome.

	

	In the end, I added metallic details such as guns etc.

	

	It was time to add the decals. I first painted all the surfaces with gloss varnish. Then I added the decals and after they set properly, I covered everything with Ultra Matt Varnish..

	

	And thus ended the painting process.

	

	GALLERY OF THE TWO FINISHED CREWS

	

	

	

	

	

	

	
"
    ["content_hrv"]=>
    string(5419) "
	

	U ovom ću  članku opisati kako sam obojao drugi set od tri autića za Gaslands demo partije. Kao i prošli puta, krenuo sam s crnim undercoatom. 

	

	S obzirom da sam odlučio da ovaj crew bude mat crn, farbanje karoserija sam tu prekinuo i počeo sam sa staklima. Slično kao i prošli put, koristio sam sličnu shemu, ali u drugim bojama. Za razliku od plavih refleksija na žutim autima, na crnima sam se odlučio za žuto/crvenu kombinaciju. 

	

	Dodao sam krom.

	

	I na kraju dodao metalne dijelove poput oružja.

	

	Na ovim autima, odlučio sam dodati i naljepnice. Prvo sam na površine s naljepnicama stavio gloss lak. Potom sam postavio naljepnicce i nakon što su se dobro osušile sam te iste površine prekrio mat lakom. 

	

	Time sam završio posao...

	

	GALERIJA ZAVRŠENIH RADOVA!

	

	

	

	

	

	

	
"
    ["created"]=>
    string(19) "2025-10-13 07:21:57"
    ["modified"]=>
    string(19) "2025-10-13 07:21:57"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "35"
    ["group_id"]=>
    string(1) "1"
    ["first_name"]=>
    string(5) "Marko"
    ["last_name"]=>
    string(9) "Paunović"
    ["first_name_mask"]=>
    string(5) "marko"
    ["last_name_mask"]=>
    string(8) "paunovic"
    ["username"]=>
    string(5) "marko"
    ["password"]=>
    string(40) "3bd37b326d19d1880d3b93a4b32e8fb3a90fa122"
    ["born"]=>
    string(19) "2033-03-07 20:35:00"
    ["created"]=>
    string(19) "2009-06-02 20:37:03"
  }
}

Marko Paunović, 13th October 2025

GASLANDS - tutorial

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "474"
    ["member_id"]=>
    string(2) "35"
    ["title_eng"]=>
    string(19) "GASLANDS - tutorial"
    ["title_hrv"]=>
    string(43) "GASLANDS - bojanje autića za postapoc igru"
    ["mask_eng"]=>
    string(19) "gaslands_-_tutorial"
    ["mask_hrv"]=>
    string(42) "gaslands_-_bojanje_autica_za_postapoc_igru"
    ["content_eng"]=>
    string(2790) "
	

	In this article I will briefly describe how I painted a set of three cars for Gaslands. I started with a black undercoat and then applied a silver (Leadbelcher) spray as the base color.

	

	Then I used the Rust effect from Dirty Down. Once the effect was dry, I sprayed the cars with a clear matte varnish to protect the layer of rust (which is activated when exposed to moisture). After the spray dried, I applied the Scratches and Heavy Chipping effect from Ammo by Mig Jimenez with a brush. After about fifteen minutes of drying, I sprayed the cars in yellow and let it dry for about 15 minutes. I used a brush to apply water over the cars and used a stiff brush, wooden skewer and cotton swab to remove the excess paint that was activated due to the Scratches and Heavy Chipping effects.

	

	Then came the painting. First I covered all the details that would not be yellow in black. Then I used blue to draw out the reflections on the glass. Added the metal details (engines and weapons). And finally added the chrome effects (using GSW paint). For the very end I left the engine shine effects.

	

	The painting of the cars for Gaslands is now complete.

	
"
    ["content_hrv"]=>
    string(2794) "
	

	U ovom članku ću ukratko opisati kako sam bojao set od tri autića za Gaslands. Krenuo sam sa crnim undercoatom na kojeg sam stavio srebrni (Leadbelcher) sprej kao osnovnu boju.

	

	Potom sam koristio Rust efekt od tvrtke Dirty Down. Kada se posušio efekt, autiće sam posprejao bezbojnim mat lakom da zaštitim sloj hrđe (koja se aktivira u doticaju sa vlagom). Nakon što se sprej osušio, kistom sam nanio Scratches i Heavy Chipping efekt od Ammo by Mig Jimenez. Nakon petnaestak minuta sušenja, autiće sam posprejao u žuto i ostavio da se osuši cca 15 minuta. Kistom sam premazao vodu preko autića i tvrdim kistom, drvenim ražnjićem i štapićem za uši sam uklonio višak boje koji se aktivirao zbog Scratches i Heavy Chipping efekata.

	

	Zatim je uslijedilo bojanje. Prvo sve detalje koji neće biti žuti sam prekrio u crnu boju. Zatim sam izvukao plavom bojom refleksije na staklima. Dodao metalne detalje (motori i oružja). I na kraju dodao krom efekte (koristeći boju tvrtke GSW). Za sami kraj ostavio sam efekte sjaja motora.

	

	TIme je završeno bojanje autića za Gaslands.

	
"
    ["created"]=>
    string(19) "2025-10-02 07:39:25"
    ["modified"]=>
    string(19) "2025-10-02 07:39:25"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "35"
    ["group_id"]=>
    string(1) "1"
    ["first_name"]=>
    string(5) "Marko"
    ["last_name"]=>
    string(9) "Paunović"
    ["first_name_mask"]=>
    string(5) "marko"
    ["last_name_mask"]=>
    string(8) "paunovic"
    ["username"]=>
    string(5) "marko"
    ["password"]=>
    string(40) "3bd37b326d19d1880d3b93a4b32e8fb3a90fa122"
    ["born"]=>
    string(19) "2033-03-07 20:35:00"
    ["created"]=>
    string(19) "2009-06-02 20:37:03"
  }
}

Marko Paunović, 2nd October 2025

UMS Agram at CK2025

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "473"
    ["member_id"]=>
    string(2) "64"
    ["title_eng"]=>
    string(19) "UMS Agram at CK2025"
    ["title_hrv"]=>
    string(42) "UMS Agram na CK2025 u Stubičkim toplicama"
    ["mask_eng"]=>
    string(19) "ums_agram_at_ck2025"
    ["mask_hrv"]=>
    string(41) "ums_agram_na_ck2025_u_stubickim_toplicama"
    ["content_eng"]=>
    string(2737) "
	

	

	

	

	

	

	

	

	For more photos check our social media!
"
    ["content_hrv"]=>
    string(2864) "
	U subotu, 27.9.2025. naši članovi su nastupili na CK2025 u Stubičkim toplicama.

	

	

	

	

	

	

	

	

	Za više fotografija posjetite naše socijalne mreže!
"
    ["created"]=>
    string(19) "2025-10-02 07:28:26"
    ["modified"]=>
    string(19) "2025-10-02 07:28:26"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "64"
    ["group_id"]=>
    string(1) "1"
    ["first_name"]=>
    string(9) "Krunoslav"
    ["last_name"]=>
    string(8) "Belinić"
    ["first_name_mask"]=>
    string(9) "krunoslav"
    ["last_name_mask"]=>
    string(7) "belinic"
    ["username"]=>
    string(5) "Kruno"
    ["password"]=>
    string(40) "eb3fda45fbec0258e90d809803b10491c548b22f"
    ["born"]=>
    string(19) "2015-01-18 09:19:00"
    ["created"]=>
    string(19) "2015-01-18 09:20:39"
  }
}

Krunoslav Belinić, 2nd October 2025

UMS Agram at Days of Technical Culture 2025

          array(2) {
  ["Article"]=>
  array(10) {
    ["id"]=>
    string(3) "472"
    ["member_id"]=>
    string(2) "96"
    ["title_eng"]=>
    string(43) "UMS Agram at Days of Technical Culture 2025"
    ["title_hrv"]=>
    string(41) "UMS Agram na 14. danima tehničke kulture"
    ["mask_eng"]=>
    string(43) "ums_agram_at_days_of_technical_culture_2025"
    ["mask_hrv"]=>
    string(39) "ums_agram_na_14_danima_tehnicke_kulture"
    ["content_eng"]=>
    string(6577) "
	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	

	For more photos check our social media!
"
    ["content_hrv"]=>
    string(7407) "
	19. i 20.9. nastupili smo na XIV danima tehničke kulture u Kulturnom centru Dubrava. Dani je organizirala Zagrebačka zajednica tehničke kulture.

	

	

	Na Dane smo došli sa izložbenim prostorom i prostorom za radionice.

	

	

	

	

	

	U sklopu nastupa organizirali smo:

	- predstavljanje Agramera, linije chibi minijatura 

	

	

	- promociju knjige Tabletop Scenery for Beginners 

	

	A s ponosom objavljujemo i da smo za naš rad u 2024. primili godišnju nagradu tehničke kulture dr. Oton Kučera

	

	

	

	Također smo organizirali i besplatne:

	- pokazne demonstracije minijaturističkih tehnika - sculpting i bojanje minijatura u petak 

	

	

	

	

	

	- Back to Basics radionice bojanja minijatura za najmlađe u subotu

	

	

	Za više fotografija posjetite naše socijalne mreže!
"
    ["created"]=>
    string(19) "2025-09-23 08:18:45"
    ["modified"]=>
    string(19) "2025-09-23 08:20:36"
  }
  ["Member"]=>
  array(10) {
    ["id"]=>
    string(2) "96"
    ["group_id"]=>
    string(1) "2"
    ["first_name"]=>
    string(6) "Antoni"
    ["last_name"]=>
    string(10) "Pastuović"
    ["first_name_mask"]=>
    string(6) "antoni"
    ["last_name_mask"]=>
    string(9) "pastuovic"
    ["username"]=>
    string(6) "antoni"
    ["password"]=>
    string(40) "5dfa823ee30df1936c1792d4c8348a4bcf4c64e2"
    ["born"]=>
    string(19) "2005-04-04 18:52:00"
    ["created"]=>
    string(19) "2019-04-04 18:53:09"
  }
}